block and brace:

You will need:

• 8 chocks / wedges
• 40 - 50 linear feet of 2x4. Scrap lumber can be used.

Cut 2x4s into 16 x 18" pieces and 8 x 24" pieces.
Nail 2x4s together, making 8 x 18" braces and 4 x 24" braces.

1. Put car in gear or park.
2. Set parking / emergency brake.
3. Insert chock / wedge under each end of each tire. Tap chocks with hammer until snugly under tires.
4. Place one 18" brace at the back of each chock. Nail or screw to the container floor.
5. Place one 24" brace snugly against the outside of each tire. Nail or screw to container floor.